HIGH
VOLUME
PUMP

ABOUT
High Volume Pumps (HVPs) are a form of specialist firefighting module designed to transport large quantities of water over long distances. These modules are transported to incidents using a prime mover and can be quickly deployed and dropped off at the scene for operation. Inside the overall module are two sub-modules carrying the HVP equipment. HVPs are primarily used in situations where local water supplies are insufficient, such as wildfires, large industrial fires, or significant flooding.
HVPs typically extract water from major water sources, such as rivers, lochs, or reservoirs, and transport it to the incident site. In cases of major flooding, they may also be deployed to pump water away from affected areas to reduce damage and restore access.
Throughout the Scottish Fire and Rescue Service (SFRS), there are four HVPs, all of which were provided by the Scottish Government to select legacy services under national resilience framework. All SFRS HVP require five HVP operators and two certified drivers to mobilise. Additional HVPs are privately operated sites such as the Grangemouth Refinery.

Specification
HydroSub Submersible Pump
Submersible pump system capable of drawing water from deep or challenging sources.
Pumping Capacity
Depending on the type of hose and operational setup, an HVP can pump water at rates between 8,000 and 22,000 litres per minute (lpm).
Hoses
A total of 3km 150mm hose is carried altogether, with 1km in the first sub-module and an additional 2km in the second, as well as ancillary equipment.
Distance Capability
Utilising all available hose with a flow rate of 8,000 lpm, the system can transport water over distances exceeding 3 kilometres.